Popcorn Removal

In the 80s, knockdown textures in popcorn ceilings was a popular look, nonetheless, it is quite outdated. In the work of professional contractors, there are a lot of people that would like to remove the knockdown texture from the ceiling but do not know ways of doing it. Below is the best method of removing this texture from your ceiling.



The leading step is moving furniture from the room if possible. In case you have furniture that is too heavy to eliminate from your room, buy plastic covers to put on the furniture. Since you are using water, turn off all electric appliances in the home. Remove all textures of light from the ceiling before spraying water. Put the plastic floor sheet on the walls about one foot and tape the edge to prevent fluids from getting below the baseboards. Some blown popcorn ceilings used before 1980 contain asbestos. Only certified asbestos contractors from PBN that are certified should eliminate this ceiling. You need to find out if the ceiling that is in your house contains asbestos by conducting a simple lab test.


Popcorn removal

Utilize the garden sprayer and water to wet the ceiling down. Work in the area about five square feet. It is better to make a few passes and let the ceiling to soak water up. Take care not to apply excess water since it can damage the surface of paper to the underlying wallboard. By the use of the joint knife, scrape moist texture from your ceiling. Water will do the majority of work and popcorn ceilings should come off with ease. If you come across spots that need hard scraping, stop and apply more water, give it time to soak and try again.


Prime and paint

If you gouge or cut the ceiling while removing the texture, use a joint compound and the tapping knife and skim the thin coat of compound on the area that is damaged. Allow it to dry and sand it lightly. By use of a latex primer, prime its ceiling. After finishing applying the primer, you can then apply the latex paint coat. After the paint drying, you might have to apply another paint coat.


Clean up

Eliminate all popcorn removal from floors and walls. Begin by removing plastic from the wall at the beginning. After removing all plastic, you will have texture that will get to the floor, but it will come up easily from the hardwood floor or carpet. Keeping the shop vacuum close will come in handy during cleaning.


Employ a firm of do it by yourself

In case you are pursuing the route by yourself, you must have a sample send out. In case that is clear, it is advisable to eliminate furniture from the room and cover the walls and floors with protective material before beginning. From there, a lot of tutorials advise soaking for about fifteen minutes when starting to scrap it off and achieve a smooth ceiling finish. Utilized tools include the garden sprayer for applying the ceiling texture scrapper and applying water to remove the material. It is also advised to use removers to command a small space to work quickly; therefore, the underlying popcorn ceiling material does not have a lot of time to absorb water and get damage.

The PBN website advises people that are eliminating material for remodeling and construction purposes to employ professional popcorn removal companies in the place of doing it by themselves. The site says that having the ceiling material with no damage is not a health risk. Many homeowners feel comfortable removing the material after learning that it might contain asbestos despite its properties of insulating noise.